A Precision Tooling Factory, Not a Trading Company
MoldPro designs, machines, heat-treats and trials every mold on our own 120+ machine floor in Dongguan — so quality never depends on a third party.
OUR STORY
Twenty Years of Ultra-Precision Tooling
Most mold buyers have been burned by the trading-company model: a sales office in Shenzhen, a workshop they'll never see, and quality that changes between orders. We built MoldPro on the opposite principle — every process from steel selection to mirror EDM happens in our own certified workshop.
Our machine floor carries Waida profile and jig grinders, Sodick mirror EDMs, Mikron high-speed CNCs and a Toshiba ultra-precision diamond lathe — equipment usually found in optics houses, applied to production molds. That is why our molds hold 0.0005 mm positioning and Ra 0.02 mirror finishes, order after order.
120+
Precision mold machines
0.0005mm
Positional accuracy (jig grinding)
2–4 wks
Injection mold lead time
24h
DFM feedback on your drawing
100% In-House Tooling
Design, machining, heat treatment, fitting, trial — under one roof in Dongguan
IATF 16949 Certified
Automotive-grade quality system with PPAP-ready documentation
CAPABILITIES & EQUIPMENT
120+ Precision Machines, One Floor
Every tolerance you see on our quote is produced and verified in-house.
Waida Optical Profile Grinders (PG)
6 units · ±0.001 mmForm grinding of punches, pins and insert profiles
Waida Jig Grinders (JG)
±0.0005 mm · Ra 0.03Hole positioning to 0.0005 mm, down to Ø0.1 mm
Sodick Mirror EDM
10 units · Ra 0.02Mirror-finish cavities for optical and medical molds
Mikron High-Speed CNC
±0.002 mm · 20,000+ RPMElectrode and core machining with fine finishes
Makino / AgieCharmilles Wire EDM
±0.001 mmPrecision wire cutting for inserts and punches
Toshiba Ultra-Precision SPDT
0.0001 mmDiamond turning for aspheric and optical surfaces
Zeiss CMM
±0.001 mmFull dimensional verification on every critical part
Mitsui Surface Grinders
51+ units · 0.001 mmProduction grinding capacity for plates and bases
Injection Molding Machines (Trial)
50–500 TIn-house mold trial — samples before shipment
PRODUCTION PROCESS
From Drawing to Trial Mold
01
DFM & Quotation
Your drawing reviewed within 24 h — manufacturability, mold layout, cycle estimate and firm price.
02
Mold Design
3D design with mold flow analysis, cooling layout and steel selection per application.
03
Machining
CNC, wire EDM, jig grinding and mirror EDM on our own 120+ machine floor.
04
Heat Treatment
In-house controlled hardening and surface treatment per steel grade.
05
Assembly & Fitting
Bench fitting, guide alignment and function checks by senior toolmakers.
06
Trial & Inspection
In-house injection trial, CMM report and sample approval before shipment.
QUALITY CONTROL
Measured, Verified, Documented
Incoming Steel Check
Material certificates verified against order spec
In-Process Inspection
CNC parts checked every 2 h with CMM & gauges
Heat Treatment Logs
Hardness and treatment records per batch
Final Dimensional Report
Zeiss CMM report with every critical dimension
Trial & Sample Approval
In-house injection trial before shipment
CERTIFICATES
Certified Quality, Automotive-Grade
IATF 16949
Automotive quality management system — PPAP-ready
ISO 9001
Quality management system, full traceability
ISO 14001
Environmental management, compliant supply chain
SUPPLY CHAIN
Steel Sourced, Machined, Shipped
Certified Steel
S136, NAK80, SKD11, SKD61, 718H with mill certificates
Global Shipping
Sea, air and express options with full trade documentation
IP Protection
NDA on request; customer tooling kept confidential
After-Sales Support
Mold maintenance guidance and repair service
See What We Can Build for You
Send your part drawing today — DFM feedback within 24 hours.